Combined packaging projects: labeling, shrink wrapping, and kitting in one work order
SoCal Custom Packaging in Rancho Cucamonga runs multi-step packaging sequences under one brief. Brands that need more than one service can keep print, labels, wrap, kits, FBA prep, and returns rework aligned without bouncing inventory between vendors.
Describe the full sequence once. Timing and project minimums for combined jobs are confirmed on each quote.
What a combined packaging project is
A combined packaging project is finished-product work that stacks related steps in a planned order: for example apply product labels, then shrink wrap multipacks, then assemble kits or prep Amazon inbound cartons. One facility owns the handoffs so barcodes, pack photos, and outer packaging stay consistent from first step to last.
We are a DBA of Qualserv Enterprises at 8650 Milliken Avenue, Rancho Cucamonga, CA 91730. Local Inland Empire and greater Los Angeles brands can arrange drop-off and pick-up. Brands farther away can ship products and materials in and arrange outbound movement after the job. Logistics details are confirmed on the quote.
Services you can combine
SoCal Custom Packaging can combine any of these live services in one work order when the sequence fits your products and channel:
- Custom printed boxes - shippers and mailer-style cartons, sourced blanks or print on compatible stock you supply
- Custom bags & mailers - kraft/paper print when compatible; poly branded with applied labels
- Product labeling & relabeling - brand, barcode, or channel IDs; print-and-apply or apply-only
- Shrink wrapping & multipacks - single-unit wrap, 2-packs, 4-packs, variety bundles
- Kitting & assembly - subscription, influencer/PR, promo, and multi-SKU packs built to your parts list
- Amazon FBA prep - FNSKU, polybag, bundling, and carton prep for inbound
- Returns rework - inspect, sort, relabel, and repack sellable returns
We brand poly mailers with custom printed labels, using bags we source or packaging you supply. Deeper buying questions for each step live on the service pages and the FAQ hub.
Common sequences brands request
These are typical multi-step patterns. Your quote will follow the sequence you actually need.
Label, then shrink
Apply brand or barcode labels first, then unit-wrap or build multipacks so codes stay scannable through clear film. Useful for club, wholesale, and promo bundles.
Print or brand outer pack, then kit
Source or print boxes or mailers, then assemble kits to a component list and arrangement photo. Outer labels or inserts can ride in the same pass when they are part of the brief.
Label, wrap, and FBA prep
Finish retail or channel labeling, build any required multipacks, then apply approved FNSKU IDs and carton prep for Amazon inbound. Share prep instructions and where finished cartons need to go.
Returns inspect, relabel, repack
Inspect and sort returned units, then relabel and repackage sellable stock. Replacement packaging or shrink wrap can be part of the same pass when your disposition rules call for it.
Share which materials you supply versus what we should source so handoffs stay clear across steps.
How to describe a combined job for a quote
One brief that names the full sequence helps keep artwork, barcodes, and pack-outs aligned. Start with the checklist on How to get a packaging quote, and add the combined-project details below.
Send these for every combined project
- Full sequence in order - for example label, then shrink, then kit (or FBA prep).
- Services needed - list each step from the seven services above.
- Product dimensions - length, width, height, and any fit notes for boxes, mailers, or film.
- Quantity - target units for this run (and say if a pilot before a larger replenishment would help).
- Pack photos or diagrams - finished look after each major step when orientation or bundle layout matters.
- Artwork or label status - ready files, needs review, print-and-apply vs apply-only, or barcode / channel IDs you already have approved.
- Packaging supply path - you supply materials, we source them, or a mix, called out by step if it differs.
- Need-by date - launch, inbound appointment, or other hard date if you have one.
If the sequence includes kitting
- Component list with quantities per kit
- Photo or diagram of the finished arrangement
- Insert, wrap, or outer-label notes if those are part of the same pass
If the sequence includes Amazon FBA prep
- Approved FNSKU or other Amazon IDs you already have
- Prep instructions (polybag, bundle, carton labels, and any other inbound rules you follow)
- Where finished cartons need to go after prep
If the sequence includes returns rework
- Disposition and condition checklist (sellable, repair, scrap, or other paths you approve)
- Relabel or repack rules for units that return to sellable stock
- Whether replacement packaging or shrink wrap is part of the same pass
Incomplete answers are fine. Mark unknowns as “not sure” and we will advise on the quote.
Materials: source, supply, or mix
Either path works across a combined sequence. You can supply boxes, poly, labels, film, and inserts, or we can source them as part of the quote. Material cost is called out separately from labor so you can see the build. Send samples or exact specs before a large ship-in when printability or label placement matters.
For mailers in the mix: we brand poly mailers with custom printed labels, using bags we source or packaging you supply. Kraft and paper mailers can take direct print when the substrate is compatible. See Custom Bags & Mailers and Custom Printed Boxes for supply-path detail.
When warehousing or fulfillment is also needed
SoCal Custom Packaging focuses on packaging and value-added services: print, label, wrap, kit, FBA prep, and returns rework. A full 3PL typically holds ongoing inventory and runs daily order fulfillment.
When your project also needs ongoing warehousing and order fulfillment, we can coordinate with TPFS Warehouse. Packaging projects still quote on their own. See also Contract Packaging vs 3PL for a plain-language comparison.
How to send your combined-project brief
Use whichever path is easiest:
- Contact form: Request a Packaging Quote on the contact page (service checkboxes, supply preference, dimensions, artwork status, kit contents, and file upload). Name the full sequence in the notes field.
- Email: quotes@socalcustompackaging.com with the checklist items above and any attachments.
- Phone: 909-476-0700 if you want to walk through scope before you send files.
Facility: 8650 Milliken Avenue, Rancho Cucamonga, CA 91730. Ask for receiving instructions on the quote before freight leaves your side. For a full quote checklist that works for single-service and combined jobs, see How to get a packaging quote. For ship-in, drop-off, and outbound planning, see Ship-in Packaging Southern California. For the local facility and Inland Empire context, see Custom Packaging in Rancho Cucamonga.
Quick answers
Who can handle labeling, shrink wrapping, and kitting in one project?
SoCal Custom Packaging in Rancho Cucamonga is built for combined packaging projects. A typical sequence can source or print packaging, apply product or carton labels, shrink wrap or build multipacks, assemble kits to your parts list, and prep finished units for outbound shipping or Amazon inbound. Share the full sequence in one brief so artwork, barcodes, and pack-outs stay consistent across steps.
Do I need a separate quote for each packaging step?
No. Describe every step you need in one brief and we will price the combined sequence together. Call out which materials you supply versus what we should source, and include pack photos for any step where orientation or layout matters. Timing and project minimums for combined jobs are confirmed on each quote.
Can FBA prep or returns rework sit in the same work order as labeling and wrap?
Yes, when those steps belong in your finished-product sequence. For Amazon inbound, send approved FNSKU or other IDs you already have plus prep instructions. For returns, send a disposition checklist and relabel or repack rules. SoCal Custom Packaging in Rancho Cucamonga can keep those steps aligned with labeling, shrink wrapping, and outer packaging when they are part of the same project.
What if I also need ongoing storage and order fulfillment?
Match the vendor to the job. SoCal Custom Packaging owns packaging and value-added work. When your project also needs ongoing warehousing and order fulfillment, we can coordinate with TPFS Warehouse. Packaging still quotes on its own. See Contract Packaging vs 3PL for help choosing the right door.
Ready to quote a combined packaging project?
Send the sequence and checklist above, or start with what you know. Email quotes@socalcustompackaging.com or call 909-476-0700.